-: Shutdown Command Via Command Prompt :-
The 'Shutdown' Command Becomes More Flexible
and Automated when used from the Command Prompt.
To Run the 'Shutdown' command from the command prompt, go to 'Start
> Run', type 'cmd', and press 'Enter'.
In the black box (the command prompt) type 'Shutdown' and the Switches
you want to use with the 'Shutdown' command.
You have to use at least
one switch for the shutdown command to work.
The Switches :-
The 'Shutdown' command has a few options called Switches. You can
always see them by typing 'shutdown -?' in the command prompt if you
forget any of them.
-i: Display GUI interface, must be the first option
-l: Log off (cannot be used with -m option)
-s: Shutdown the computer
-r: Shutdown and restart the computer
-a: Abort a system shutdown
-m \\computername: Remote computer to shutdown/restart/abort
-t xx: Set timeout for shutdown to xx seconds
-c “comment”: Shutdown comment (maximum
of 127 characters)
-f: Forces running applications to close without
-d [u][p]:xx:yy: The reason code for the shutdown
u is the user code p is a planned shutdown code xx is the major reason
code (positive integer less than 256) yy is the minor reason code
(positive integer less than 65536)
Note :- I’ve noticed using a switch with a
'-' sign doesn’t work sometimes.
If you are having trouble try using a '/' in place of '-' in your
shutdown –m \\computername –r –f
This command will
restart the computer named computername and force any programs that
might still be running to stop.
shutdown –m \\computername –r –f –c “I’m
restarting your computer. Please save your work now.” –t
This command will restart the computer named computername, force
any programs that might still be running to stop, give to user on
that computer a message, and countdown 120 seconds before it restarts.
shutdown –m \\computername –a
This command will abort
a previous shutdown command that is in progress.
Using A Batch File :-
You can create a file that performs the shutdown command on many computers
at one time.
In this example I’m going to create a batch file that will
use the shutdown command to shut down 3 computers on my home network
before I go to bed.
Open 'Notepad' and type the shutdown command to shut down a computer
for each computer on the network.
Make sure each shutdown command
is on its own line.
An example of what should be typed in notepad is given below-
shutdown –m \\computer1 –s
shutdown –m \\computer2 –s
shutdown –m \\computer3 -s
Now I’ll save it as a batch file by going to file, save as,
change save as type to all files, give the file a name ending with
'.bat'. I named mine 'shutdown.bat'.
Pick the location to save the
batch file in and save it.
When you run the batch file it’ll shutdown computer 1, 2, and
3 for you.
You can use any combination of shutdown commands in a batch file.